webleads-tracker

Home  >  MEMS  > IDT introduces world’s first piezoelectric MEMS oscillators ...
  >  MEMS
May 10th, 2012
 
IDT introduces world’s first piezoelectric MEMS oscillators for high-performance applications
 
IDT’s 4M series LVDS / LVPECL oscillators with less than one picosecond of jitter are an ideal replacement for traditional six-pin crystal-based oscillators.
Send to a friend
IDT 4M series high-performance LVDS / LVPECL oscillators.
IDT 4M series high-performance LVDS / LVPECL oscillators.

Integrated Device Technology, Inc. (IDT®; NASDAQ: IDTI), the Analog and Digital Company™ delivering essential mixed-signal semiconductor solutions, today announced the world’s first CrystalFree™ piezoelectric MEMS (pMEMS™) LVDS / LVPECL oscillators for high-performance communications, consumer, cloud, and industrial applications. IDT’s new oscillators operate with substantially less than one picosecond of phase jitter in compact industry-standard packaging, making them an ideal replacement for traditional six-pin crystal oscillators (XOs).

The IDT 4M series high-performance LVDS / LVPECL oscillators leverage IDT’s patented CrystalFree pMEMS resonator technology, enabling IDT to rapidly factory-program the desired output frequency without the need to fine-tune expensive crystals. In addition, because the nominal resonator frequency of pMEMS is much higher than quartz crystal, 4M oscillators are able to achieve higher frequencies at lower cost without sacrificing critical performance. The 4M series is the first of a broad portfolio of MEMS-based devices from IDT that will provide customers with convenient, accurate, low-jitter timing references.
 
“As the leader in timing, our customers have been waiting for IDT’s pMEMS technology to expand into high-performance applications such as communications – a significant segment of the $4B frequency control market,” said Fred Zust, vice president and general manager of the Timing and Synchronization Division at IDT. “IDT’s patented pMEMS resonator technology combines the strong electromechanical coupling of the piezoelectric material with the stability and low damping of single-crystal silicon, allowing us to create convenient and cost-effective XO replacements with unparalleled performance and reliability. These products complement our award-winning solid-state oscillators to offer a comprehensive frequency control portfolio to replace quartz-based devices in a growing number of market segments.”
 
The IDT 4M oscillators operate with ±50 ppm frequency accuracy over the wide industrial temperature range of -40°C to 85°C. The devices support low-voltage differential signaling (LVDS) and low-voltage positive emitter-coupled logic (LVPECL) at frequencies of up to 625 MHz, meeting the stringent requirements of most communications, networking and high-performance computing applications. In addition to 7.0 x 5.0 mm (7050) sizes, IDT’s pMEMS oscillators are available in small 5.0 x 3.2 mm (5032) standard plastic packages to save cost and minimize the application footprint in densely populated enclosures. By design, they are pin-to-pin compatible with traditional XOs, making them an ideal upgrade replacement solution.
 
Pricing and Availability

The IDT 4M oscillators are currently sampling to qualified customers and are available in hundreds of configurations based on frequency, voltage, output types and industry standard packages. For more information about IDT’s CrystalFree pMEMS oscillators, visit www.idt.com/go/MEMS.
 
About IDT
Integrated Device Technology, Inc., the Analog and Digital Company™, develops system-level solutions that optimize its customers’ applications. IDT uses its market leadership in timing, serial switching and interfaces, and adds analog and system expertise to provide complete application-optimized, mixed-signal solutions for the communications, computing and consumer segments. Headquartered in San Jose, Calif., IDT has design, manufacturing and sales facilities throughout the world. IDT stock is traded on the NASDAQ Global Select Stock Market® under the symbol “IDTI.” Additional information about IDT is accessible at www.IDT.com. Follow IDT on Facebook, LinkedIn, Twitter, and YouTube.

 

 
More MEMS news

Apr 24th
Apr 23rd
Apr 23rd
Apr 18th
Apr 17th
 
©2007 Yole Developpement All rights reserved                  Disclaimer | Legal notice | To advertise
Yole Développement: Le Quartz, 75 cours Emile Zola, 69100 Villeurbanne, France. TEL: (33) 472 83 01 80 FAX: (33) 472 83 01 83 E-Mail: info @yole.fr