webleads-tracker

Home  >  POWER ELECTRONICS  > Infineon-Led key project “eRamp” to strengthen the European ...
  >  POWER ELECTRONICS
Apr 16th, 2014
 
Infineon-Led key project “eRamp” to strengthen the European electronics industry
 
One of the most important European research projects focused on energy efficiency was launched on the 2nd of April at Infineon Technologies in Dresden.
Send to a friend

The objective of the three-year project “eRamp” is to strengthen and expand Germany and Europe as centers of expertise for the manufacture of power electronics. 26 research partners from six countries are participating. Infineon, the world market leader in power semiconductors, is leading the Euro 55 million project.

The project partners will join policymakers and representatives from the project’s sponsors at the two-day eRamp kickoff event (April 2-3, 2014). Dr. Reinhard Ploss CEO of Infineon Technologies AG, will start off the event by meeting with Sabine von Schorlemer, Saxon State Minister for Higher Education, Research and the Fine Arts; Prof. Wolf-Dieter Lukas, department head at the BMBF (German Federal Ministry of Education and Research), the largest national sponsor; and with Dr. Andreas Wild, Executive Director of ENIAC Joint Undertaking, the funding provider of the European Union.

The research results from eRamp will be an important contribution to even more efficiently use energy,” says Dr. Reinhard Ploss, CEO of Infineon Technologies AG. ”Europe and Germany are distinguished by their characteristic knowledge and expertise. The partners in the eRamp project have the entire power electronics value creation chain in mind, from generation and transmission all the way to consumption of electric energy. Together we will create new knowledge and thus new products that will mean economic and ecological progress for Europe.”

BMBF department head Prof. Wolf-Dieter Lukas adds: ”Power electronics is a key technology and a determining factor in the competitive ability of fundamental industry sectors in Germany and Europe. The cooperative approach of the European Commission and the German federal government in funding eRamp is a clear example of the benefits of joint action in Europe.”

The eRamp project, led by Infineon Technologies Dresden, brings the European industry for power electronics components to the forefront of innovation, with considerable impact on important areas of industry and everyday life, such as energy efficiency, electromobility, medicine and many more,” says Dr. Andreas Wild, Executive Director of ENIAC Joint Undertaking.

When examined closely, most of the innovations with which German companies have succeeded in the world market are ultimately innovations in electronics and/or software. This applies to the automotive industry, mechanical engineering, medical technology and environmental technologies. Therefore we must not let ourselves become dependent on non-European manufacturers in microelectronics,” observes Sabine von Schorlemer, Saxon State Minister for Higher Education, Research and the Fine Arts, also responsible for technology policy issues.

eRamp strengthens Germany and Europe as established centers of expertise for power electronics manufacturing

eRamp research activities will focus on the rapid introduction of new production technologies and further exploration of chip packaging technologies for power semiconductors. The German project partners will investigate and develop new methods for speeding up the start of the production run.

In order to investigate research results for practical viability exactly where the new production technologies will be implemented, the German research partners will use existing pilot lines and comprehensive production expertise at various German sites, including Dresden (Infineon: power semiconductors based on 300mm wafers), Reutlingen (Bosch: power semiconductors, smart power and sensors based on 200mm wafers) and Regensburg (Infineon: chip packaging technologies for power semiconductors). Infineon, Osram and Siemens will work together closely to research and construct testing equipment and demonstrators for the evaluation of newly developed chip embedding technologies.

In Germany, the Technical University of Dresden and West Saxon University of Applied Sciences Zwickau are also participating in research. In addition to Bosch, Infineon, Osram and Siemens, German business is represented by the companies SYSTEMA Dresden, an IT specialist vendor for automation in the manufacturing industry, HSEB Dresden, provider of optical inspection, review and installation, and SGS INSTITUT FRESENIUS, a leading vendor of chemical and physical laboratory analysis.

More energy efficiency through power electronics
Power electronics includes electronic components and the chips built into them, so-called power semiconductors. Power semiconductors help keep the loss of electrical energy as low as possible. They make sure that the greatest possible amount of energy generated by wind or the sun is fed into the power grid and transmitted almost completely without loss over many thousands of kilometers from the generation site to the consumer. They then also help minimize power consumption in a wide variety of applications, e.g. in household appliances, illumination technologies, servers and computers, in hybrid and electric drive systems for cars, commercial vehicles, construction and agricultural machines as well as in industrial energy technologies and production facilities.

eRamp: A strong team with 26 research partners from six countries
The research partners in the eRamp project are (in alphabetical order): AMS AG (Unterpremstatten, Austria), CISC Semiconductor GmbH (Klagenfurt, Austria), HSEB Dresden GmbH (Dresden, Germany), Infineon Technologies (Germany: Dresden, Regensburg, Munich; Villach, Austria and Bucharest, Romania), JOANNEUM RESEARCH Forschungsgesellschaft GmbH (Graz, Austria), Lantiq (Villach, Austria), Materials Center Leoben Forschung GmbH (Leoben, Austria), NXP Semiconductors (Gratkorn, Austria and Eindhoven, Netherlands), Osram GmbH (Munich), Polymer Competence Center Leoben GmbH (Leoben, Austria), Robert Bosch GmbH (Stuttgart, Germany), SGS INSTITUT FRESENIUS (Taunusstein, Germany), Siemens AG (Berlin, Munich), SPTS Technologies Ltd (Newport, UK), Stichting IMEC Nederland (Eindhoven, Netherlands), SYSTEMA Systementwicklung Dipl.-Inf. Manfred Austen GmbH (Dresden), Slovak University of Technology (Bratislava, Slovakia), Technical University Vienna and University of Innsbruck (both in Austria) as well as Technical University Dresden and the West Saxon University of Applied Sciences, Zwickau (Germany).

The Project eRamp is co-funded by grants from ENIAC Joint Undertaking and from Austria, Germany, the Netherlands, Romania, Slovakia und the UK.


 
More POWER ELECTRONICS news

Sep 16th
Sep 15th
Sep 11th
Sep 8th
Sep 8th
 
©2007 Yole Developpement All rights reserved                  Disclaimer | Legal notice | To advertise
Yole Développement: Le Quartz, 75 cours Emile Zola, 69100 Villeurbanne, France. TEL: (33) 472 83 01 80 FAX: (33) 472 83 01 83 E-Mail: info @yole.fr