webleads-tracker

Home  >  NANOMATERIALS  > Rolith, Inc. demonstrates superior performance of ...
  >  NANOMATERIALS TECHNO
Aug 14th, 2013
 
Rolith, Inc. demonstrates superior performance of ITO-alternative transparent metal grid electrodes fabricated using proprietary nanolithography technology
 
Rolith, Inc., a leader in developing advanced nanostructured devices, announces the successful demonstration of Transparent Metal Grid Electrode technology based on its disruptive nanolithography method (Rolling Mask Lithography – RMLTM).
Send to a friend

The company want apply this technology to high quality cost effective touch screen sensors for mobile devices and large format displays, monitors and TVs.

We see an explosive growth of touch screen displays in consumer electronics market. ITO (Indium Titanium Oxide) material is a standard solution for transparent electrodes so far. Apart from a considerable cost and limited supply of this material, it has additional problems: high reflectance of this materials reduces contrast ratio, optical properties degrade rapidly below 50 Ω/☐, which limits the size of display produced using ITO without degradation of performance.

The only viable alternative to ITO (and the only solution for large touchscreen displays) is a metal wire grid. The requirement for a metal wire grid to be invisible to human eye means that width of the wire should be < 2 micron. Moreover, narrow wires are helpful to fight Moiré effects, which caused by superposition of the metal wire grid and the pixel structure of a display.

Rolith, Inc. has used its proprietary nanolithography technology called Rolling Mask Lithography (RMLTM) for fabrication of transparent metal wire grid electrodes on large areas of substrate materials. RML is based on near-field continuous optical lithography, which is implemented using cylindrical phase masks.

Transparent metal electrodes on glass substrates were fabricated in the form of submicron width nanowires, lithographically placed in a regular 2-dimentional grid pattern with a period of tens of microns, and thickness of a few hundreds of nanometers. Such metal structure is evaluated as completely invisible to the human eye, highly transparent (>94% transmission) with a very low haze (~2%), and low resistivity (<14 Ohm/☐). This set of parameters places Rolith technology above all major competition for ITO-alternative technologies.

Gen-2 RML tool capable of patterning substrates up to 1 m long and built earlier this year has been used to demonstrate this technology.

Rolith has launched Transparent Metal Grid Electrodes application development just few months ago, and we are very excited with the extraordinary results already achieved. We believe RMLTM technology will enable high quality cost effective touch screen sensors for mobile devices and large format displays, monitors and TVs. Currently Rolith is negotiating partnerships with a few touch screen display manufacturers and hope to move fast with commercialization of our technology next year. Our roadmap also calls for expansion into OLED lighting and flexible substrates in 2014-2015”, said Dr Boris Kobrin, founder and CEO, Rolith. He adds: “Rolith will be presenting its breakthrough technology at the upcoming International Touch Panel 2 and Optical Film Exhibition (“Touch Taiwan 2013”), booth 126, and Printed Electronics USA 2013, booth AA18

 

 
More NANOMATERIALS TECHNO news

Aug 9th
Jun 27th
May 5th
Mar 31st
Mar 31st
 
©2007 Yole Developpement All rights reserved                  Disclaimer | Legal notice | To advertise
Yole Développement: Le Quartz, 75 cours Emile Zola, 69100 Villeurbanne, France. TEL: (33) 472 83 01 80 FAX: (33) 472 83 01 83 E-Mail: info @yole.fr