Secure payment on i-micronews Contact Yole Développement for I Micronews reports

RSS I-micronewsYole Dévelopement on TwitterYole Développement on Google +LinkedIn Yole pageSlideshare Yole Développement I-Micronews

Aptiv’s Third Generation of 77 GHz-Based Short-Range Radar (SRR3)

3 490 €

Choose a minimum of three reports from Yole Group and receive a discount of at least 36% on your package – Contact us!



SP18432 Aptiv SRR3 Radar flyer cover

The first highly integrated 77 GHz short range radar sensor for advanced driver assistance systems with a single receive-transmit MMIC bare die from Infineon found on the market.


This year, we have seen radar applications use two frequencies, 24 GHz and 77GHz. For a long time, 24 GHz has been dedicated to Short Range Radar (SRR) detection applications like Blind Spot Detection (BSD) or Rear Side Detection (RSD). But due to spectrum regulations, the 24 GHz ultra-wide band (UWB) will soon phase out in Europe and the USA. This, and the need for higher performance in emerging radar applications, makes 24 GHz unattractive. And now manufacturers have turned their interest to the 76-81 GHz band. Aptiv, formerly known as Delphi, has taken a step ahead of its competitors since the first generation of SRR radar by using 77GHz for BSD. Using this band has allowed to Aptiv to propose high resolution and accuracy SRR with even smaller form factor in the third generation, SRR3.

The SRR3 device, FCC certified in 2015, is a side and backside SRR. It is designed for various Advanced Driver Assistance Systems (ADAS) applications such as capturing the blind spot, assisting lane changes and warnings against cross traffic. It features three different PCB substrates with two dedicated to Radio Frequency (RF) signal processing and transmission.


SP18432 Main Board logo


Working in the 76-77 GHz un-licensed band, the device contains forty H-pole planar antennas fed by cavity waveguides. With its small form factor, it could compete with the standard dual board radar modules.

Compared to its competitors, Aptiv is still the only one that uses bare die Monolithic Microwave Integrated Circuits (MMICs) and cavity waveguides. In this module, the innovation is in the single chip from Infineon that integrates four receive (Rx) and two transmit (Tx) channels using SiGe Heterojunction Bipolar Transistor (HBT) technology. And, the RF Printed Circuit Board (PCB) substrate uses glass-reinforced hydrocarbon ceramic laminate, completely PTFE free.

Based on a complete teardown analysis of the Aptiv Radar, the report provides the bill-of-material (BOM) and the manufacturing cost of the radar sensor. The report also includes a complete physical analysis of the MMIC. Also, the complete cost analysis and a selling price estimation are calculated.


  SP18432 PCB Cross Section logo SP18432 Radar Overview logo SP18432 MMIC Die logo











Table of contents


>  Executive SummaryBlock

> DiagramReverse Costing

> MethodologyCompany Profile and Main Features


Physical Analysis

> Overview of the Radar

> Views and Dimensions of the Radar

> Radar Opening

> Electronic Boards

> Global View

> High Definition Photo

> Components Markings and Identification

> RF Configuration

> MMIC Physical Analysis















































Cost Analysis

> Boards Cross Section

> PCBs Cost

> Estimation of the cost of the MCU

> Estimation of the cost of the MMIC

> BOM Cost – Electronic Board

> BOM Cost – Housing

> Material Cost Breakdown

> Accessing the Added Value (AV) cost

> Electronic Board Manufacturing Flow

> Details of the Housing Assembly

> Added Value Cost Breakdown

> Manufacturing Cost Breakdown


Estimated Price Analysis

> Estimation of the Selling Price


About the authors


System Plus Consulting specializes in the cost analysis of electronics, from semiconductor devices to electronic systems.

Created more than 20 years ago, System Plus Consulting has developed a complete range of services, costing tools and reports to deliver in-depth production cost studies and estimate the objective selling price of a product.

System Plus Consulting engineers are experts in:

  • Integrated Circuits 
  • Power Devices & Modules 
  • MEMS & Sensors
  • Photonics 
  • LED 
  • Imaging 
  • Display 
  • Packaging 
  • Electronic Boards & Systems.

Through hundreds of analyses performed each year, System Plus Consulting offers deep added-value reports to help its customers understand their production processes and determine production costs. Based on System Plus Consulting’s results, manufacturers are able to compare their production costs to those of competitors.

System Plus Consulting is a sister company of Yole Développement.

More info at 




















































  • Detailed photos

  • Materials analysis

  • RF chipset

  • Block diagram

  • PCBs cross-section

  • Physical analysis and estimation of the cost of the MCU and MMIC

  • Complete and priced bill-of-materials

  • Manufacturing process flow

  • Manufacturing cost analysis

  • Estimated cost and sales price