Secure payment on i-micronews Contact Yole Développement for I Micronews reports

RSS I-micronewsYole Dévelopement on TwitterYole Développement on Google +LinkedIn Yole pageSlideshare Yole Développement I-Micronews

2-Axis Gyroscopes for Optical Image Stabilization: STMicroelectronics L2G2IS and InvenSense IDG-2030

5 500 €

Choose a minimum of three reports from Yole Group and receive a discount of at least 36% on your package – Contact us!



Yole 2 Axis OIS Gyroscopes Flyer

Complete reports and comparison of the latest generation products for smartphones from the leading optical image stabilization gyro players

2-Axis Gyroscopes for Optical Image Stabilization (OIS) constitute a market where 123 million units were shipped in 2015, according to Yole Développement. This market originates only from high-end smartphones and two players share most of it: InvenSense, with 49%, and STMicroelectronics, with 39%.

The 2-axis gyroscopes are located inside the camera module of high-end smartphones. The main constraints are a small footprint and, more importantly, thinness.

Previously, thickness was the same as standard land grid array (LGA) or quad flat no-leads (QFN) package, close to 1mm. Now the standard is 0.65mm, which products from both InvenSense and STMicroelectronics attain.


SC RS298 299 2 Axis OIS GyroscopesImage2

InvenSense was first, with the IDG-2030, a 2.3x2.3x0.65mm gyroscope, which is still the smallest on the market. Since its introduction we found it in several smartphones from various manufacturers. The IDG-2030 uses the same Nasiri platform as other InvenSense inertial devices, with wafer-level integration of the MEMS sensor on top of the application specific integrated circuit (ASIC), thus providing only one die in the final LGA package.

Months later, STMicroelectronics released the L2G2IS, which shares the same dimensions. The device is manufactured using the same THELMA process as all STMicroelectronics inertial devices. The THELMA platform involves a two-die approach that is challenging for very thin package integration. However, both players now offer very low-cost gyros thanks to die size reduction and process optimization.
Both gyroscopes analyzed are 2-axis X, Y (Pitch, Roll). The two reports can be purchased separately or together in order to compare the technology and pricing of the main smartphone OIS gyro players, including previous generation products.


SC RS298 299 2 Axis OIS GyroscopesImage3



Table of contents

Overview / Introduction


Company profile & Supply Chain


Physical Analysis

> Package
- Package views and dimensions
- Package opening
- Package cross-section

> ASIC Die
- View, dimensions, and marking
- Delayering and process
- Cross-section

> MEMS Die
- View, dimensions, and marking
- Cap Removed
- Sensing Area
- Cross-sections (Sensor, Cap, Sealing)

















































Manufacturing Process Flow

> ASIC front-end process
> ASIC wafer fabrication unit
> MEMS process flow
> MEMS wafer fabrication unit
> Packaging process flow
> Package assembly unit


Cost Analysis

> Yields hypotheses
> ASIC front-end cost
> ASIC back-end 0: probe test and dicing
> ASIC wafer and die cost
> MEMS front-end cost
> MEMS back-end 0: probe test and dicing
> MEMS front-end cost per process steps
> MEMS wafer and die cost
> Back-end: packaging cost
> Back-end: packaging cost per process steps
> Back-end: final test cost
> Gyroscope component cost


Estimated Sales Price






About the authors


System Plus Consulting specializes in the cost analysis of electronics, from semiconductor devices to electronic systems. Created more than 20 years ago, System Plus Consulting has developed a complete range of services, costing tools and reports to deliver in-depth production cost studies and estimate the objective selling price of a product. System Plus Consulting engineers are experts in Integrated Circuits - Power Devices & Modules - MEMS & Sensors - Photonics – LED - Imaging – Display - Packaging - Electronic Boards & Systems.

Through hundreds of analyses performed each year, System Plus Consulting offers deep added-value reports to help its customers understand their production processes and determine production costs. Based on System Plus Consulting’s results, manufacturers are able to compare their production costs to those of competitors.

System Plus Consulting is a sister company of Yole Développement.

More info at 
































































  • Detailed photos

  • Precise measurements

  • Material analysis

  • Manufacturing process flow

  • Supply chain evaluation

  • Manufacturing cost analysis

  • Estimated sales price

  • Comparison between STMicroelectronics and InvenSense