Unisantis unveils dynamic flash memory as DRAM alternative | including Yole’ DRAM market figures

Unisantis® Electronics Singapore Pte. Ltd, unveiled the company’s developments in Dynamic Flash Memory (DFM)® technology, a leap forward in the industry’s search for alternatives to DRAM for future low-cost high-density embedded or standalone memory applications. DFM is able to offer faster speeds and higher density when compared to DRAM or other types of volatile memory.

DFM was presented this week for the first time at the 13th IEEE International Memory Workshop (IMW), by its inventors, Drs. Koji Sakui and Nozomu Harada from Unisantis.

DRAM is a volatile, capacitor-based, destructive-read form of memory – and its challenge has long been to continue packing in more storage for lower cost, without increasing power consumption. DFM takes a revolutionary approach to overcome limitations of conventional volatile memory such as DRAM, with its inherent short, regular and power-hungry refresh cycles, as well as destructive read processes.

DFM is also a type of volatile memory, but since it does not rely on capacitors it has fewer leak paths, it has no connection between switching transistors and a capacitor. The result is a cell design with the potential for significant increases in transistor density and, because it not only offers block refresh, but as a Flash memory it offers block erase — DFM reduces the frequency and the overhead of the refresh cycle and is capable of delivering significant improvements in speed and power compared to DRAM.

By utilizing TCAD simulation, Unisantis has proven DFM has a substantial potential to increase density 4X compared to DRAM. The scaling of DRAM has almost stopped at 16Gb, according to recent IEEE ISSCC (International Solid-State Circuits Conference) papers. Modelling DFM at 4F2 cell density shows how perfectly structured DFM is (see 4F2 cell image here).

The design and development of DFM means significant Gb/mm2 improvements, and limits on DRAM (currently 16Gb) could immediately see increases to 64Gb memory using DFM’s radically enhanced cell structure.

Replacing DRAM is a major challenge for the industry, not only because DRAM accounts for over 50% of the current market demand for memory (Yole Development, 2020). Forecasts also suggest the need for this type of low cost, high density DRAM by 2025 will continue to grow and exceed $100Bn. But technology challenges also lie ahead in some of the proposed replacements, including capacitor-less DRAM, ZRAM or simplistic GAA and Nanosheet approaches, all which have their own limitations compared to DFM.

Unisantis was built on a history of successes in the memory semiconductor market, having been established by Dr. Fujio Masuoka in Singapore following his ground-breaking work in developing Flash memory at Toshiba. Dynamic Flash Memory was developed by Unisantis with the proven technological principles of SGT Technology building on that work and the company’s innovations, particularly in memory semiconductors.

Between 2008 and 2012 Unisantis embarked on a Joint Research Collaboration Agreement with the Institute of MicroElectronics in Singapore ( IME – https://www.a-star.edu.sg/ime ) and successfully created a vertical Surrounding Gate Transistor at the IME facility.

Koji Sakui, Unisantis and co-inventor of DFM, commented “The memory industry has long-since accepted DRAM technology is nearing the end of its life, but its significant market means any replacement technologies must provide the right balance of performance, costs and future scalability. After significant internal research and testing, we are delighted to unveil DFM to the market as the long-term viable option to DRAM.

Source: https://unisantis.com/

Related presentations

Cet article vous a plu ?

Partagez-le sur vos réseaux sociaux